EN 
AR
FR
PT
RU
ES
Torsion Resistant Flexible Cable for Wind Power Generation
This cable is mainly used for connecting 1.8/3kV wind power generation or similar system, mainly laid inside the generator cabin, on the upper part of cabin and tower, from lower part of tower to the cabin transformer.
Property of this cable conforms to GB/T 29631-2013.
Product Description
Product Characteristics
Voltage level U0/U: 450/750V、0.6/1kV、1.8/3kV;
20℃ DC resistance of conductor conforms to Class 5 in GB/T 3956-2008 or EN 60228;
The allowed continuous max. operating temperature of conductor: 90℃;
Ambient temperature: -40℃～+70℃;
The minimum bending radius: 6 D (D refers to outer diameter).
Construction diagram
1.conductor 2. Insulation 3. sheath
Type, Name and Application
|
Type |
Name |
Application |
|
FDEF |
copper core EPR insulated neoprene sheathed torsion resistant flexible cable for wind power generation |
Applicable to wind power generation system or similar system of 1.8/3kV and below |
|
FDEH |
copper core EPR insulated and chlorosulfonated polyethylene rubber sheathed torsion resistant flexible cable for wind power generation |
Applicable to wind power generation system or similar system of 1.8/3kV and below |
Product Scope
|
Type |
Rated Voltage |
Core No. |
Nominal Cross-section(mm²) |
|
FDEF FDEH
|
450/750V 0.6/1kV |
1 |
1.5~400 |
|
2 |
1.0~185 |
||
|
3 |
1.0~300 |
||
|
3+1 |
1.0~185 |
||
|
4 |
1.0~300 |
||
|
5 |
1.0~185 |
||
|
6~36 |
1.5~4 |
||
|
1.8/3kV |
1 |
10~400 |
|
|
3 |
10~240 |
